EV charging software that runs the network, protects the power, and pays everyone.
KW Energy is EV charging software for Canadian sites: one platform runs your charging business, keeps your electrical service safe through a -30 °C winter peak, and pays every site owner in Canadian dollars when the month closes. $0 CMS subscription on KW Energy chargers, and available for the OCPP chargers you already own.
Three problems decide whether a charging site makes money.
Taking money from drivers, keeping the electrical service safe, and paying whoever owns the site. Most platforms solve the first. Some solve the second. Paying site owners is usually left to a spreadsheet, or to a net figure with no session detail behind it.
Taking money from drivers
Card, wallet, RFID or app, priced by energy, time or session, with receipts and refunds handled properly.
Most platforms solve thisKeeping the service safe
Sharing a fixed electrical service across every charger without tripping the main breaker or paying for an upgrade.
Some platforms solve thisPaying the site owner
Working out what each owner earned, proving it session by session, and moving the money without a spreadsheet.
Where KW Energy leadsKW Energy solves all three on standard OCPP. Your chargers stay on an open protocol, and your data can be exported in full at any time.
One console for every charger, every driver and every tariff.
The platform is multi-tenant and role based. An operator, a site owner, a maintenance partner and a finance user each see their own data and nothing else.
See the KW Energy app in 17 seconds
Start a session, set your pricing and see every session tracked, from your phone.
Operator console
Start and stop sessions remotely, unlock a connector, change availability and configuration, pull diagnostics, read meter values, reset a unit, and push firmware to one charger or the whole fleet. First and second line support roles are kept separate.
Pricing engine
Price by energy, time, session or any combination. Add a timer model that switches to a per-minute rate after a set period, and an idle fee with a grace period once a battery is full. Vary prices by power band, site, charger, connector, postal code, driver or network. KW Energy supports time, session and kWh pricing; kWh billing in Canada follows Measurement Canada rules.
Reporting
Sessions per day, charger availability, revenue per charger and sessions by time of day, per site and per charger. Every session carries its own record: energy, duration, tariff applied and the payment taken. Custom reports are built on request.
Five ways for drivers to charge
The KW Energy app
Map, wallet, charging credit, history and state of charge, with filtering by AC or DC.
QR direct
Scan the code on the charger and pay by card, Google Pay or Apple Pay. No app download and no account.
Payment terminal
Tap or insert a card at a payment terminal on the charger, on hardware that has one. No app and no account.
RFID
Cards registered to a driver or a site. The usual choice for staff, tenants and fleet vehicles.
Charging credit
Enter a code from your building, employer, hotel or fleet in the KW Energy app or at the QR screen, and charge against that balance. Paid credit never expires. How credit works
Roaming on OCPI
Drivers from other networks can charge on your sites, and their sessions are cleared and paid to you. Visibility is set per charger, so you choose which chargers visiting drivers can see. Private networks can be set up for a city, a region, a condo or strata corporation, or a corporate group.
Tax and currency
Canadian sites are priced and paid in CAD, kept strictly separate from any other currency, with GST/HST and provincial sales tax handled per province and per party. Registered internal drivers, such as staff and tenants, charge with no billing at all.
Put more chargers on the electrical service you already have.
The chargers are rarely the expensive part of a project. The service upgrade is. KW Energy Power shares each circuit in real time between the chargers actually drawing current, so you can install the charge points the site needs instead of upgrading the supply. In condo and strata buildings it fits the way the Canadian Electrical Code treats EV load management (Rule 8-106), with the design signed off by your licensed electrician.
Shares every circuit dynamically
Each circuit gets an amp budget, split in real time among the chargers actually drawing current and reassessed every 60 seconds. A finished car cannot hold capacity it is not using.
Protects every charger thermally
A charger running hot is stepped back in stages. The thermal layer can only lower an allocation, never raise it past what the circuit can safely supply.
Commands only validated hardware
Every firmware family is validated before it is managed. Unrecognised firmware is refused rather than guessed at.
Proven on live Level 2 sites
Results from a live KW Energy site. KW Energy Power manages chargers over standard OCPP smart charging, the same way on Level 2 and DC. Every charger model, AC or DC, is validated at commissioning before KW Energy Power manages it.
Every site is proved before it is trusted: we apply the limit during a live session with a real vehicle and confirm with metered current that the charger came down. A site is not signed off until it does.
How KW Energy load management works in detail: safety layers, site modes and building diagnostics
Five layers that keep a site safe when nobody is watching
| Layer | What it does |
|---|---|
| Stale-data protection | If data from a charger goes stale, the limit is held. The system never raises a limit based on information it cannot currently see. |
| Offline failsafe | A maximum limit is stored on the charger itself, so it stays bounded even if it loses contact with the network. |
| Hardware ceiling | A ceiling is set in the charger’s own configuration and honoured with no management system involved at all. |
| Validated hardware only | Unrecognised or unvalidated firmware is refused rather than commanded. |
| Write discipline | Limits change only when the change is meaningful, because every adjustment makes a vehicle ramp its current and ramping generates heat. |
Two modes, chosen per site
| Shared capacity | Live building metering | |
|---|---|---|
| What it protects | The circuit feeding the chargers | The whole electrical service, including everything else in the building |
| How it knows | The ceiling set from your panel schedule | A meter on the main, read continuously |
| Best for | A dedicated charging circuit with a known rating | A shared service where building load changes through the day |
| Hardware needed | None | One metering device at the panel |
| Price | Included on every plan | Quoted with your site |
In shared-capacity mode the limit is stored on each charger, so a site keeps its ceiling even if the building’s internet drops. Off-peak charging can be scheduled with a staggered start across the site, so twenty vehicles do not all begin at the same minute. Site owners can change schedules and lower their site limit from their own login, but never above the safety limit set at commissioning.
It also measures your building
Finds weak supply
Thousands of paired voltage and current readings measure the supply path from the transformer to each charger and identify a circuit weaker than it should be. No site visit and no electrician present.
Separates charger from supply
Tells a failing charger apart from a supply that was never adequate, from recorded data, before anyone is dispatched to site.
Sees problems coming
Tracks thermal behaviour over time, including seasonal change from summer heat to winter peaks, so a site approaching its limits is flagged before it starts failing.
Proves what happened
A charger fault backed by thousands of timestamped readings is a matter of record, which matters when a warranty claim or a driver complaint has to be settled.
Site owners get paid on what cleared the bank, not on what the meter guessed.
The KW Energy settlement layer matches every charging session to the payment that actually cleared, separates paid sessions from complimentary ones, produces a statement for each site owner, and pays them out. No spreadsheets, no month-end guesswork, no disputed statements.
How site owners get paid, in 20 seconds
The driver pays, KW Energy Pay matches the session, and the owner is paid monthly.
- Driver chargesIn the app, with an RFID card, with a credit code, or by scanning the QR code with no app at all.
- Session classifiedPaid or complimentary, which tariff, which site, which owner. Decided at the point of billing, not afterwards.
- Payment confirmedEach paid session is matched to its settled card payment. Declines, expired holds and refunds drop out here.
- Statement producedEvery site owner gets a line-by-line statement for the period, self-billed on their behalf.
- Owner paidFunds move from Stripe to the owner’s own Stripe Connect account, reconciled to the cent, in Canadian dollars.
Every figure traces in both directions: from a kilowatt hour delivered at a connector through to a deposit in a site owner’s account, and back again.
Paid and complimentary never mix
A hotel charger serves paying visitors and complimentary guests from the same unit. Every session is classified at the point of billing, so staff, guest and internal sessions are never counted as owner revenue, and a paid session is never missed.
Reconciled to the payment, not the meter
A session that was started and metered is not the same as a session that was paid for. Each paid session is confirmed against the settled transaction before it reaches a statement, so nothing is paid out on a session that never cleared.
Paid into their own account
Driver payments are held in Stripe, not in our bank account. When the month closes, each site owner is paid from Stripe into their own Stripe Connect account and withdraws to their bank whenever they choose. Their banking details go to Stripe and never reach us.
Statements, payouts and the controls behind them
Statements and payouts
Statements a bookkeeper can check by hand
Each site owner receives a self-billed statement carrying their own GST/HST registration number where they have one, so they never have to invoice us. Every line ties to a specific driver payment.
The owner sees the same numbers you do
Site owners get their own login with their sites, sessions and statements: a line for every session with energy delivered, what the driver paid and what the owner earned.
Card processing at exact cost
Card fees are recovered at the exact amount charged on each specific payment. Not a flat percentage and not an average. There is no percentage of energy revenue: the KW Energy charge is the subscription or the session fee, and nothing else.
Controls that make the numbers trustworthy
| Control | How it works |
|---|---|
| Nothing settles on unresolved data | Anything that does not satisfy the rules is raised and blocks. A single questionable session can be set aside while the month still closes. A problem affecting a whole site stops the run until a person decides. |
| Separation of duties | Calculating, approving and paying are three permissions with separate credentials. The approver and the payer can be required to be different people. |
| A name on every entry | Every close, approval and payment records the person who authorised it. |
| Approved runs never change | An approved run is frozen. A refund or correction appears as its own line on the next statement, so a statement an owner has received cannot change underneath them. |
| Accounts re-verified before payout | Every destination account is re-verified before money moves, and a run will not start if the balance cannot cover it. |
KW Energy Solutions Canada Inc. is the merchant of record for Canadian sites: drivers pay us, we handle card processing, chargebacks and receipts, and the site owner carries no card risk. Sessions from visiting networks are itemised separately and paid in the same monthly run. Payouts go to site owners in Canada, in Canadian dollars.
A statement where every line ties to a payment that cleared.
It shows each paying session, the energy it sold, the exact card fee on that payment, and what the owner keeps, in Canadian dollars. Visiting-network sessions and the owner’s own unbilled charging are shown separately.
Public charging, card sessions
| Date | Charger | kWh | Energy at your tariff | Card fee, exact | Due to you |
|---|---|---|---|---|---|
| Aug 02 | P01 | 18.240 | C$8.21 | (C$0.56) | C$7.65 |
| Aug 04 | P02 | 22.400 | C$10.08 | (C$0.61) | C$9.47 |
| Aug 06 | P01 | 11.905 | C$5.36 | (C$0.48) | C$4.88 |
| Aug 09 | P03 | 27.312 | C$12.29 | (C$0.68) | C$11.61 |
| Aug 14 | P01 | 31.066 | C$13.98 | (C$0.73) | C$13.25 |
| Aug 19 | P02 | 24.883 | C$11.20 | (C$0.65) | C$10.55 |
| Aug 22 | P01 | 16.520 | C$7.43 | (C$0.54) | C$6.89 |
| Aug 28 | P04 | 13.208 | C$5.94 | (C$0.49) | C$5.45 |
| 8 sessions | 165.534 | C$74.49 | (C$4.74) | C$69.75 |
Roaming, drivers from visiting networks
| Date | Charger | Network | kWh | Your share |
|---|---|---|---|---|
| Aug 11 | P01 | Visiting network | 21.078 | C$6.32 |
| Aug 25 | P01 | Visiting network | 19.308 | C$5.79 |
Prepaid credit sessions
| Sessions paid from credit you sold | Driver session fee, from their credit | Passed through to KW Energy |
|---|---|---|
| 5 sessions | C$0.75 per session, flat | 5 × C$0.75 = (C$3.75) |
Energy revenue passes through to you in full, less the exact card fee on each payment. The KW Energy session fee (C$0.75 per paying session on Tailwind in this example) is collected from the driver on top of your tariff and is not deducted from your energy revenue. On sessions paid from credit you sold, the driver pays the same session fee from their credit balance; because you hold that credit money, the driver’s fee is passed through here, and your energy revenue is not reduced. Your own vehicles charged 84.0 kWh this period at no cost, shown on a separate own-usage summary. This sample prices by the kWh; KW Energy supports time, session and kWh pricing; kWh billing in Canada follows Measurement Canada rules. Real statements show GST/HST for your province.
Decide who charges, and who pays, with one instrument.
KW Energy issues charging credit as codes. A driver enters a code in the app and the balance appears in their wallet, ready to spend at any charger on that network. A front desk or building manager can sell credit and hand over a code, with no card reader at the charger and no card on file.
Fleet operations
Allocate credit instead of handing out fuel cards. Credit can be issued per driver, vehicle or depot, and every session is attributed back to it. A depot manager tops up a driver without a procurement cycle, and a driver who leaves takes no payment card with them.
Condo, strata and rental buildings
Residents get credit with their lease or through the condo or strata corporation, as a monthly allowance or on request. Visitors get a code from the front desk. The building needs no card reader at the charger and gets a per-unit record for its own recharges.
Credit is also permission
Issuing credit is how you decide who may charge at a site: residents, staff, a named fleet or a hotel’s own guests. Withdraw the credit and the access goes with it, with no second access-control system to run.
Sold at the front desk
A front desk, concierge or building manager sells charging credit to residents and guests, however the building takes payment. The code goes straight into the driver’s app, and every code sold is logged.
Credit across the portfolio
Credit is issued against an operator’s account, not a single charger, so one code can work at every building you run.
Prepaid wallet and top-up
Drivers with cards can load credit and turn on automatic top-up, so a session never fails at the connector. Paid credit never expires.
Every code issued, redeemed and spent is tracked, so an operator can reconcile codes against credit sold and know exactly what is outstanding.
Two ways to buy. No percentage of your energy revenue.
Buy KW Energy chargers and the CMS subscription is $0 per month for the life of each unit, on KW Energy chargers. Already have chargers from another brand? Any OCPP charger can run on the CMS-only path. All prices in Canadian dollars.
Path 1 · With KW Energy hardware
Included with every KW Energy charger| Plan | Built for | Subscription | Per paying session, paid by the driver |
|---|---|---|---|
| Zephyr L2 | Fleet, condo, strata, workplace · Level 2 | $0 per month on KW Energy chargers | None |
| Zephyr DC | Fleet, condo, strata, workplace · DC | $0 per month on KW Energy chargers | None |
| Tailwind | Hotel, parking, retail · paid Level 2 | $0 per month on KW Energy chargers | C$0.75 |
| Jetstream | Public, highway · paid DC fast | $0 per month on KW Energy chargers | C$1.75 |
Path 2 · CMS only, any OCPP charger
Per port, CAD| Plan | 1-year term | 3-year term | 5-year term | Per paying session, paid by the driver | Buy |
|---|---|---|---|---|---|
| Zephyr L2 | C$15 per month | C$11 per month | C$10 per month | None | Buy |
| Zephyr DC | C$20 per month | C$18 per month | C$15 per month | None | Buy |
| Tailwind | No monthly fee | No monthly fee | No monthly fee | C$0.75 | Buy |
| Jetstream | No monthly fee | No monthly fee | No monthly fee | C$1.75 | Buy |
Prices in CAD per port, before tax; GST/HST is added by province at checkout. Every CMS-only plan is sold on a 1, 3 or 5-year term with no platform fee (see what is included below). Zephyr adds a monthly subscription; Tailwind and Jetstream have no monthly fee and carry a session fee paid by the driver on paying sessions only: C$0.75 on Tailwind and C$1.75 on Jetstream. Zephyr starts with a sandbox trial. KW Energy supports time, session and kWh pricing; kWh billing in Canada follows Measurement Canada rules.
Included on every plan, with no platform fee
There is no platform fee on any plan. We include everything needed to get your chargers live on KW Energy:
- Charger setup and onboarding: each charger connected to KW Energy over OCPP, configured, tested and commissioned before it goes live.
- Brand certification: your charger model validated on the platform, so it works reliably for the whole term.
- Site configuration: your sites, pricing, access rules and load limits set up for you in the operator console.
- Payment integration (Tailwind and Jetstream): QR card payments, the driver app and monthly payouts in CAD to your account switched on.
- Site owner training: a live session for you and your team on the console, reports and monthly statements.
Never charged on KW Energy chargers: chargers bought from us are onboarded with no platform fee.
Included on every plan
- Software load management on every port
- Automated monthly settlement and statements, in CAD
- Operator console, dashboards and role-based access
- Driver access by the KW Energy app, QR card payment, payment terminal and RFID
Charged separately, only when it applies
- Session fee: C$0.75 (Tailwind) or C$1.75 (Jetstream) on paying sessions only. Always paid by the driver on top of your tariff, including sessions paid from prepaid credit, so it never comes out of your energy revenue
- Card processing: recovered at the exact cost of each payment, no mark-up
- Roaming clearing: only on sessions crossing to or from another network
- Live building metering: quoted with your site
If your charger speaks OCPP, it can run on KW Energy.
KW Energy runs on OCPP 1.6 today and is OCPP 2.0.1 ready. No firmware modification, no gateway hardware and no proprietary protocol. Each charger model is validated during commissioning, so its behaviour is known rather than assumed.
What you need
- Chargers speaking OCPP 1.6J or later, with charging profile support
- Network connectivity to each charger
- Your circuit layout, recorded once at commissioning
Tested before it goes live
A conformance suite checks each charger against the OCPP standard before go-live: identity and configuration, metering, smart charging, billing data and behaviour under sustained load. Anything untested is reported as untested, never as a pass.
Support
Charger status is monitored continuously, and a unit that drops off the network shows immediately rather than when a driver reports it. Our team is available from 7 a.m. to midnight Eastern. The platform is backed by a 97% uptime SLA.
Your data is yours
Session, charger and settlement data can be exported in full at any time, and functionality you depend on is not withdrawn without notice.
Chargers online the same day. Sites live in days, not weeks.
| Step | Typical time |
|---|---|
| Connect and test KW Energy chargers | A few hours |
| Connect and test another OCPP brand | Within a day |
| Load limit tested with a real vehicle | The same day as connection |
| Tariffs, payments and the site owner’s payout account | 1 to 2 days |
| Go live | Usually within the week |
The site owner’s payout account needs identity verification by Stripe, which can take a day or two. Live building metering needs a licensed electrician to fit a meter at the panel. A charger with a technical issue can take longer, and we will tell you at kick-off. Testing runs until a real session can be taken end to end, and billing starts at the first successfully connected charge point, not at signature.
The same platform answers a different question for each person at the table.
Charging operator
One console for every site and every owner, month-end settlement that runs without a spreadsheet, and the same effort at five chargers or five hundred.
Site owner
More charge points on the existing service, a deferred or avoided electrical upgrade, and a monthly statement that reconciles to the cent.
Property manager or condo board
No nuisance trips of the main breaker, no competition between EV charging and the rest of the building, and a defensible record when a driver complains.
Fleet operator
Predictable overnight completion within a fixed service capacity, credit per driver or vehicle, and early warning of a developing supply problem.
Electrical consultant
A documented, standards-based demand control, with continuous evidence of what each charger was offered and what it actually drew.
Drivers
Pay in seconds with no app or account, by QR or card terminal, or use the KW Energy app. See the price before charging starts, get a receipt every time, and keep prepaid credit that never expires.
What Canadian operators and site owners ask us.
Is KW Energy CMS $0 per month on KW Energy chargers?
Yes. On every KW Energy charger the KW Energy CMS subscription is $0 per month for the life of the unit, with no platform fee. Plans that collect payment from drivers carry a per-session fee paid by the driver, C$0.75 on Tailwind and C$1.75 on Jetstream, and nothing else.
Can I run chargers from another brand on KW Energy?
Yes. Any charger that speaks OCPP 1.6J or later with charging profile support can run on KW Energy on the CMS-only path. Each charger model is validated during commissioning before it goes live, and onboarding, brand certification, site configuration, payment integration and site owner training are included, with no platform fee.
Can I bill drivers per kWh in Canada?
KW Energy supports time, session and kWh pricing; kWh billing in Canada follows Measurement Canada rules. Many Canadian sites price by time or by session, and we help you choose the right model when we set up your tariffs.
Who is the merchant of record?
KW Energy Solutions Canada Inc. is the merchant of record for Canadian sites. Drivers pay us, we handle card processing, chargebacks and receipts, and the site owner never handles card data or driver payment disputes.
When and how are site owners paid?
Monthly, in Canadian dollars. Driver payments are held in Stripe, not in our bank account. When the month closes and the run is approved, each site owner is paid from Stripe into their own Stripe Connect account, and they withdraw to their bank whenever they choose.
Do site owners have to invoice you?
No. KW Energy issues a self-billed statement on the site owner’s behalf, carrying their GST/HST registration number where they have one, under a written agreement with them. Every line ties to a specific driver payment that has cleared.
Can staff or residents charge without paying?
Yes, and it stays separate from revenue. Staff, tenants, condo residents and the site owner’s own vehicles can be registered for internal use. Their sessions are never billed, never appear as sales, and are reported on a separate own-usage summary.
Does KW Energy take a percentage of my energy revenue?
No. Energy revenue passes through in full. KW Energy’s charge is the subscription or the per-session fee, and card processing is recovered at the exact cost charged on each payment, with no mark-up.
Will load management slow charging down?
Only when the site is at its limit, which is the alternative to not being able to install the charger at all. When capacity frees up, the chargers that are still drawing current get it back at the next reassessment, within 60 seconds.
What do I need for load management?
For shared capacity on a dedicated circuit, nothing beyond the chargers and your circuit layout, recorded once at commissioning. For live metering of a whole building, one metering device at the panel, fitted by a licensed electrician and quoted with your site.
How does prepaid charging credit work for site owners?
You sell charging credit to your drivers at face value, as a code or on a card, and keep the money. Sessions paid from that credit carry the same session fee as a card session. It is paid by the driver from their credit balance, on top of your tariff, so your energy revenue is never reduced, and you pay no card processing on those sessions.
Does prepaid charging credit expire?
No. Paid charging credit never expires. Every code issued, redeemed and spent is tracked, so an operator always knows what is outstanding.
Do I need a server or computer on site?
No. The platform runs in the cloud and you sign in from your own computer. In shared-capacity mode the charging limit is also stored on each charger, so a site keeps its ceiling even if the building’s internet drops.
How long does it take to go live?
Usually within a week. KW Energy chargers connect and test in a few hours and other OCPP brands within a day. Payment setup and the site owner’s payout account take a day or two, and billing starts at the first successfully connected charge point, not at signature.
Tell us your sites. We will come back with a plan and a firm price.
Send us your Canadian sites, your charger models and your circuit capacity. We can start with one site and prove it before you commit the rest.
sales@kwenergy.io · 1 (888) 528-7582 · 7 a.m. to midnight Eastern